Roller Screed Spec Sheet

The Roller Screed offers uniform placement of the mortar and is essential for a consistent and successful epoxy flooring installation. The rear outrigger wheel adds greater stability than conventional screed boxes. The position of this rear wheel has eliminated the need to add weight to the front of the units to reduce inconsistencies of the operator.

There is no need to add any additional weight to the Roller Screed.

The Roller Screed comes in two widths, 24" and 32" wide. The 24" wide holds 2,325 cubic inches of mortar, while the 32" wide holds 3,810 cubic inches of mortar. The deflector plate dispenses mortar up to 1" thick, extends past the hopper to reduce lap marks, and easily adjusts with wing nuts. Both sizes are made of heavy gauge steel that will tolerate flame burning to remove cured epoxy. The handle is aligned at 165 degrees for a convenient resting position and is shaped to permit the dumping of mortar directly from a wheelbarrow. The handle and wheels are pinned for easy removal to clean or transport, and a utility tray conveniently holds support tools.

These aluminum gauge rakes are ideal for screeding a uniform thickness of most polymer self-leveling and mortar systems. Cams (ranging from 1/16" to 1/2") secure on the threaded end studs with wing nuts. The innovative radial design maintains uniform thickness even at varying handle angles and length. The cam sets are sold separately.

Handle sold separately (click for info)

Wire floor spreader is designed to glide over surface irregularities. Wire glides are easy to replace and have a 0.090 thick tempered wire. Adjustable aluminum gate for coating thickness of 0" to 5/8", and no tools are needed for adjustment. Wire glides maintain uniform thickness at varying angles.

The plastic spreader is designed for self-leveling underlayments and other mortar systems. The runners easily adjust with wing nuts to distribute mortar at a thickness range of up to 2.25".