HoverTrowel - Specialty Mixing Items

Specialty Mixing Items

Download Brochure (PDF)

HIGH POWER HANDHELD MIXER

CSU-23-R Mixer can be used on the Hippo Mixer to mix half batches only. (Requires HT-PM-EA extension & collar for use w/ Porta Mix)

CSU-23-R SPECIFICATIONS:
Power Input	14.5 Amp (1600 W)
Rated Voltage	120 Volt/AC
Load Speed	100-275 RPM

The powerul 14.5 Amp motor enables mixing of high viscosity materials in batches up to 176 lbs.

The special ergonomic handle ensures comfortable handling and protects the mixer against dirt if it's put down at the building site.

Paddles: Must be Purchased separately

HT-23R-H (Helical)

HT-23R-M (Mortar)

Item Description	Part #
High power variable speed handheld mixer	CSU-23-R
Helical mixing paddle	CSU-23R-H
Mortar mixing paddle	CSU-23R-M
4" extension & collar for use with Porta Mix	CSU-PM-EA

VARIABLE SPEED HANDHELD MIXER

HT-20-S can not be used with the hippo mixer.

HT-20-S SPECIFICATIONS:
Power Input	10 Amp (1100 W)
Rated Voltage	120 Volt/AC
Load Speed	0-580 RPM

The HT-M-20-S is designed to handle construction materials in batches up to 110 lbs. High reliability, a long lifetime and robustness are the units features, and make it an indispensable tool for professionals

Distinguishing features are the variable speed switch for stepless electronic control and special ergonomic handle for comfortable use and motor protection.

Paddles: Must be Purchased separately

HT-20S-H (Helical)

HT-20S-M (Mortar)

Item Description	Part #
Variable speed handheld mixer	CSU-20S
Helical mixing paddle	CSU-20S-H
Mortar mixing paddle	CSU-20S-M

MIXING STAND

Features:

Adjustable swing arm
Variable height and mixer paddle positing
Heavy-duty column
Stable base
Adjustable positioning for mixing bucket
All Parts rust resistant

The CSU-RST-90 Mixing Stand is easy to set up. It allows efficient mixing on site or in the shop. By using a power mixer on the stand it is possible to mix and add the correct ratio of liquids, powders and materials. Save time by running the mixer independently while other work is done. The collar clamp and reducer rings fit the portable mixing machines, models CSU-23R & CSU-20S.

TECHNICAL SPECIFICATIONS:
Coulum Height	65-1/4"
Base Dimensions	28" L x 20" W
Stroke Length	40"
Collar Clamp	2.4"
Reducer Rings	1.72" , 1.84"
Weight	69 lbs.

Item Description	Part #
Mixing Stand	CSU-RST-90

MONO MIX MIXING PUMP

The Mono-Mix mixing pump is designed to increase installation productivity and quality of pre-blended cementatious materials. It is engineered to provide a constant water-to-material ratio while placing the material where needed. Easy setup and transportation, Mono-Mix can be stationed quickly to begin production and rapidly cleaned so it can be moved to the next project.

The M-Tec Mono-Mix is only used with dry, preblended bagged materials on-site with 230V single-phase supply with 16A fuse.

Some Advantages:

Extremely functional design and compact construction
Machine requires only one man to operate
Easy to clean
Easy to transport and move around the job site
Use state-of-the-art Variable Frequency Drive for increased reliability
Variable speed production
Manufactured to the latest safety regulations
Delivered ready for use with everything needed
Onboard water pump included

Item Description	Part #
Mono-Mix Pump	MT-MP
1" Cleaning Balls	MT-CB-1
2" Cleaning Balls	MT-CB-2
Rotor (High Volume)	MT-RR-8
Stator (High Volume)	MT-SR-8
Rotor (Low Volume)	MT-RD-8
Stator (Low Volume)	MT-SD-8
1" x 33' Black Hose	MT-H-1
1" x 33' White Hose	MT-H-2
2" x 50 Hose	MT-H-3